工程训练国家级实验教学示范中心(江苏大学)
国家级实验教学示范中心
江苏大学主页 | English
网站首页
教研与科研
教学研究
科学研究
科研获奖
自制仪器
科研论文
当前位置: 网站首页 > 教研与科研 > 科学研究 > 科研论文 > 正文
发表科研论文
发布日期:2012-10-02   浏览次数:

序号

论文名称

刊物名称

作者

收录情况

卷期

年度

1

The research on micro-punching by laser-driven flyer 

International Journal of Machine Tools and Manufacture 

 Huixia Liu, Hejun Wang, Zongbao Shen, Zhihui Huang, Wei Li, Yuanyuan Zheng, Xiao Wang

SCI 检索

 2012, 54-55: 18-24

2012

2

Feasibility investigations on a novel micro embossing using laser-driven flyer

Optics & Laser Technology

Huixia Liu, Zongbao Shen, Xiao Wang,Pin Li, Yang Hu and Chunxing Gu

SCI 检索

 (SCI收录,IF=1.616) 

2012

3

Modeling and prediction of transmission laser bonding process between titanium coated glass and PET based on response surface methodology

Optics and Lasers in Engineering

Huixia Liu, Kai Wang, Pin Li, Cheng Zhang, Daozhong Du, Yang Hu, Xiao Wang

SCI 检索

2012,50(3) 440-448(SCI检索,IF=1.838)

2012

4

Influence of film thickness of Ti coating on bonding quality of glass with PET

Surface Engineering 

 H. X Liu, K. Wang, C. Zhang, P. Li, Y. Y. Gao, Y. Hu and X. Wang

SCI 检索

2012(已校样)(SCI源刊)

2012

5

Modeling and optimization of laser transmission joining process between PET and 316L stainless steel using response surface methodology

Optics & Laser Technology

Xiao Wang, Xinhua Song , Minfeng Jiang , Pin Li , Yang Hu , Kai Wang , Huixia Liu

SCI 检索

44 (2012) 656–663 (SCI检索,IF=1.567)

2012

6

Numerical study of the mechanism of explosive/impact welding using Smoothed Particle Hydrodynamics method  

Materials and Design

Xiao Wang , Yuanyuan Zheng, Huixia Liu, Zongbao Shen, Yang Hu, Wei Li, Yangyang Gao, Chao Guo

SCI 检索

35 (2012) 210–219(SCI检索,IF=2.2)

2012

7

Study on the Numerical Simulation and Statistical Optimization of Micro-Scale Laser Shock Peening

Journal of Computational and Theoretical Nanoscience

Zhu, Wei ; Zhou, Jianzhong; Wang, Min; Huang, Shu; Fan, Yujie; Wei, Denghui; Wang, Wei

SCI检索

 9: 1-5

2012

8

Effect of repeated impacts on mechanical properties and fatigue fracture morphologies of 6061-T6 aluminum subject to laser peening . 

Materials Science and Engineering A

Zhou, J.Z.; Huang, S.; Sheng, J.; Lu, J.Z.; Wang, C.D.; Chen, K.M.; Ruan, H.Y.; Chen, H.S.  

SCI检索

539:360-368

2012

9

Study on Simulation of Residual Stress Distribution in Microscale Laser Shock Peening Based on Crystal Orientation

Journal of Computational and Theoretical Nanoscience

Zhou, Jianzhong ; Fan, Yujie; Huang, Shu; Wang, Wei; Wei, Denghui; Fan, Jinrong; Zhu, Wei; Gao, Bin

SCI检索

9(16):1-6

2012

10

Near-field properties of diffraction through a circular aperture with subwavelength size

Chinese Physics B.

Wang Zheng-Ling, Zhou Ming, Gao Chuan-Yu and Zhang Wei, 

SCI源刊

(已录用) 

2012

11

激光驱动飞片加载下基体/薄膜层裂微成形研究 

激光技术

刘国芳,高传玉,杨晓红,马明,李奇军

 

Vol.36 No.3 P298-300 

2012

12

激光微冲击成形技术分析与展望

激光与光电子进展

范金荣, 黄舒, 周建忠, 樊玉杰, 高彬, 朱伟, 徐增闯

EI检索

49:010003-1-8

2012

13

工科大学生综合与创新训练的探索与实践

中国电力教育

黄舒,周建忠,刘会霞,杨超君, 盛杰  

 

25:13-14

2012

14

激光透射连接 PET 的工艺参数建模与优化

高分子材料科学与工程

王 凯, 许贞凯, 刘会霞, 张 成

EI检索

28(2):183-186,190

2012

15

镀钛玻璃与犘犈犜之间的激光透射连接及其性能

中国激光

 刘会霞,王凯,李品,张成,高阳阳,严长,王霄

EI检索

Vol.39,No.9:p0902008-1-7

2012

16

基于遗传算法-响应曲面方法的激光透射焊接聚碳酸酯工艺的多目标优化

中国激光

王霄,张成,王凯,李品,高阳阳,胡杨,刘会霞

EI检索

39(6),2012,0603003-1-7

2012

17

2024铝合金薄板拼焊工艺优化及有限元模拟分析

热加工工艺

高传玉;曹敏;陈浩;刘国芳

 

Vol.41 No.11P178-181

2012

18

激光微喷丸强化纯铜表面的纳米压痕分析

中国激光

樊玉杰, 周建忠, 黄舒, 范金荣, 王呈栋, 王维, 卫登辉, 朱伟, 高彬

EI检索

 38(6):06030261-5

2012

19

激光冲击铜箔飞片及其复合成形研究

中国激光

周建忠,高彬,黄舒,刘会霞  陈寒松,杨晶,左立党,安中伟 

EI检索

排版中

2012

20

基于应变速率的激光喷丸强化6061-T6铝合金力学性能分析

中国激光

周建忠, 左立党, 黄舒, 徐增闯, 杨晶, 季杏露, 谢小江

EI检索

39(5):05030031-6

2012

21

Influence of Overlapping Rate on Residual Stress Treated by Multi-micro Laser Shock Peening

Chinese Optical Letter

Yujie Fan ;Jianzhong Zhou ;Shu Huang;

EI检索

排版中

2012

22

Application of Central Composite Design Based on Numerical Integration for Optimization of Laser Shock Peening

Advanced Materials Research

Zheng, Gang; Fan, Jinrong; Huang, Shu; Zhou, Jianzhong; Ruan, Hongyan

EI检索

452-453 : 1074-1078

2012

23

Study on 2-D Shock Wave Pressure Model in Micro Scale Laser Shock Peening

Reviews on Advanced Materials Science

Yujie Fan ;Jianzhong Zhou ;Shu Huang ;Wei Wang;Denghui Wei;Jinrong Fan;Bin Gao

SCI检索

排版中

2012

24

大耕深旋耕刀的制造工艺及其耐磨性

扬州大学学报(自然科学版)

袁晓明,王宏宇,赵玉凤,缪宏,张瑞宏

 

2012.2,Vol.15No.1:p33-37

2012

25

旋耕刀用65Mn钢表面渗铬工艺优化及其耐磨性研究

农机化研究

赵玉凤,王宏宇,王荣,陈康敏,袁晓明

 

2012.10,No.10:p156-160

2012

26

C194铜合金薄板激光弯曲试验及力学性能分析

江苏大学学报(自然科学版)

黄舒,周建忠,胡玲玲,杨小东

EI检索

2012.1,Vol.33No.1:p96-101

2012

27

Micromold-based laser shock embossing of metallic foil: Fabrication of large-area three-dimensional microchannel networks

Materials and Manufacturing Processes

Shen, Zongbao; Liu, Huixia; Wang, Xiao; Wang, Hejun

SCI检索

2011,26(9):1126-1129

2011

28

Nanoscale trap for isolated cold atoms by the nanoscale solid-state system

Advanced Materials Research 

Zhengling Wang, Ming Zhou, Wei Zhang,Chuanyu Gao and Guorong Cao,

SCI检索

304, 263-267 (2011)(SCI)

2011

29

Vector propagation properties of the Bessel–Gauss beam in the far field

 OPTICS COMMUNICATIONS

Zhengling Wang, Ming Zhou , Wei Zhang, Yu Zhou,Guorong Cao, Chuanyu Gao,

SCI检索

13,055704  (2011) (SCI)

2011

30

Study on the Improvement of Fatigue Crack Growth Performance of 6061-T6 Aluminum Alloy Subject to Laser Shot Peening

Key Engineering Materials 

Wang, C.D. ; Zhou, J.Z.; Huang, S.; Yang, X.D.; Xu, Z.C.; Ruan, H.Y. 

EI检索

464:391-394

2011

31

Study on Characteristics of Stress and Parameters Influence in Microscale Laser Shock Peening

Key Engineering Materials 

Fan, Y.J. ; Zhou, J.Z.; Huang, S.; Wang, W.; Wei, D.H.; Zhu, W. 

EI检索

464:336-339

2011

32

Optimization of Process Parameters for Vacuum Casting Micro-gear

Key Engineering Materials 

Dai, Y.C. ; Zhou, J.Z.; Huang, S.; Guo, J.; Xiao, L. 

EI检索

464 : 698-702

2011

33

Experimental Study of Micro-scale Laser Shock Peening on Copper Foils

Key Engineering Materials 

Zhu, W. ; Zhou, J.Z.; Wang, M.; Huang, S.; Wei, D.H.; Fan, Y.J. 

EI检索

464 :506-509

2011

34

Design of Progressive Die Based on Component in UG Environment

Key Engineering Materials 

Tan, W.S. ; Zhou, J.Z.; Guo, J.; Huang, S.; Wang, C.D.; Gao, B.; Sheng, J. 

EI检索

464:146-150

2011

35

Parameters Optimization of Laser Shot Peening Based On Multi-island Genetic Algorithm

Applied Mechanics and Materials 

Wang, W. ; Zhou, J.Z.; Huang, S.; Fan, Y.J.; Wang, C.D.; Fan, J.R. 

EI检索

 43: 387-390

2011

36

Numerical Study of Vacuum Casting DVD Panel Based on Silicon Mould

Applied Mechanics and Materials 

Yang, J. ; Xiao, L.; Zhou, J.Z.; Huang, S.; Fan, J.R.; Dai, Y.C.  

EI检索

 43: 707-711

2011

37

Rapid fabrication of micro-gear via vacuum casting technique of silicone rubber mould

Advanced Materials Research 

Zhou, J.Z. ; Xiao, L.; Huang, S.; Zhu, J.H.; Xu, Z.M.; Huang, J.; Dai, Y.C.

EI检索

97-101:4016-4019

2011

38

Theoretical Calculation and Numerical Analysis of Residual Stress in Laser Peen Forming of Metal Plate

Key Engineering Materials

Zhou, J.Z.; Huang, S.; Sheng, J.; Fan, J.R.; Xu, Z.C.

EI检索

464:588-591

2011

39

Progress in Theory and Application Research on Microscale Laser Shock Peening

Advanced Materials Research

Wei, Denghui ; Zhou, Jianzhong; Huang, Shu; Fan, Yujie; Wang, Min 

EI检索

135:194-199

2011

40

不同覆盖率下激光喷丸6061-T6铝合金疲劳裂纹扩展的数值模拟研究

中国激光

徐增闯,周建忠,黄舒,左立党,  杨晶

EI检索

38(12): s103006-1-6

2011

41

基于数值模拟的激光喷丸参数集成优化方法研究

中国激光

范金荣,周建忠,黄舒,王维,樊玉杰,高彬,朱伟,徐增闯  

EI检索

38(12): s103003-1-7

2011

42

微尺度激光喷丸强化TiN涂层的表面性能

光学精密工程

周建忠, 卫登辉, 黄舒, 朱伟, 樊玉杰

EI检索

19 (11): 2679-2684. 

2011

43

6061-T6铝合金紧凑拉伸试样激光喷丸强化后的疲劳裂纹扩展性能研究

中国激光

周建忠, 王呈栋, 黄舒, 杨小东, 徐增闯, 杨晶, 朱伟

EI检索

38(9):07030091-6

2011

44

基于不同应力比下激光喷丸强化6061-T6铝合金的疲劳裂纹扩展性能研究

中国激光

周建忠, 徐增闯, 黄舒, 杨小东, 王呈栋, 杨晶, 左立党, 季杏露

EI检索

38(9):09030061-6

2011

45

微尺度激光喷丸纯铜数值模拟和统计优化分析

中国激光

朱伟,周建忠,黄舒,樊玉洁   

EI检索

38: s(103005)1-7

2011

46

旋转磁场在微小工件磁力研磨加工中的应用  

机械设计与制造

高传玉,倪秀付,袁润,顾文艳. 

 

2011. 2 P64-66

2011

47

飞秒激光烧蚀Ag膜的研究

工程材料

吴小麟,高传玉,周明,张伟

EI检索

vol.42,2011增刊Ⅰ,p179-182

2011

48

基于响应曲面和遗传算法-人工神经元网络的热塑性塑料激光透射焊接强度的优化

中国激光

张成,王霄,王凯,张虎,刘江,蒋涛,刘会霞

EI检索

38(11):1103006-1-7

2011

49

Optimization of Laser Transmission Joint between PET and Titanium using Response Surface Methodology

Advanced Materials Research Vols

Xinhua Song,  Xiao Wang,Pin Li,Zhenkai Xu,Kai Wang, Huixia Liu

EI 检索

154-155 (2011) pp 1119-1124

2011

50

Optimization of Process Parameters of Thin Aluminum-Lithium Alloy Sheet Metal Laser Forming Based on Water-cooling 

Advanced Materials Research

Minfeng Jiang, Lei Ding ,Yuanyuan Zheng,Xiao Wang 2,d and Huixia Liu

EI检索

2011,154-155:1152-1156

2011

51

Numerical Simulations of the Spall Damage of the Target Material Induced by Laser Driven Flyer Impacting

Advanced Materials Research

Hejun Wang, Huixia Liu,Zongbao Shen,Wei Li,Yuanyuan Zheng,and Xiao Wang

EI检索

2011,156-157 :1305-1312

2011

52

Numerical Simulation of Thermal/ Mechanical Coupling in Laser Transmission Microjoining of PET and Titanium

Advanced Materials Research Vols

Zhenkai Xu, Huixia Liu, Pin Li, Xinhua Song, Kai Wang, Xiao Wang

EI检索

2011,160-162:1118-1125

2011

53

Optimization of Laser Transmission Joint between Different Thermoplastics using Response Surface Methodology

Advanced Materials Research

Zhenkai Xu,Kai Wang,Minfeng Jiang, Yang Hu, Cheng Zhang,Pin LI,Huixia Liu 

EI检索

2011,291-294:1433-1439

2011

54

AZ31B镁合金激光喷丸后的形变强化及疲劳断口分析

中国激光

黄舒,周建忠,蒋素琴,盛杰,徐增闯,阮鸿雁

EI检索

2011.8,Vol.38No.8:p08030021-7

2011

55

Al2O3 陶瓷激光铣削数值模拟与试验

农业机械学报

黄舒,周建忠,盛 杰,朱银波

EI检索

2011.7,Vol.42No.7:p229-234

2011

56

C/A code of GPS software receiver fast acquisition based on FPGA

2011 International Conference on Electric Information and Control Engineering

胥保文

EI检索

p 4030-4033, 2011

2011

57

Computation and Analysis of Unbalancing Response of High Speed Machining Tool System

Advanced Materials Research

Shen, Chungen; Wang, Guicheng; Wang, Shulin; Nie, Wenwu; Liu, Gang

EI检索

v148-149, p 40-46, 2011

2011

58

Determining Structural Modes of HSK Tool System and Influential Factors

Advanced Materials Research

Shen, C.G.; Wang, G.C.; Wang, S.L.; Nie, W.W.; Liu, G. 

EI检索

v188, p67-72, 2011

2011

59

Investigation on the Effect of Thickness to Sheet Metal Treated by Laser Peen Forming

Key Engineering Materials

Shu Huang, Jian Zhong Zhou, X.D. Yang, Hong Yan Ruan, Deng Hui Wei, J.R. Fan

EI检索

2011, Vol.464:p33-37

2011

60

Experimental Investigation on the Influence of Tool System Imbalance on Its Vibration Characteristics

Advanced Materials Research

Chun Gen Shen, Gui Cheng Wang, Shu Lin Wang, Gang Liu

EI检索

Vols. 291-294(2011)

2011

61

Analysis and Testing of the Dynamic Performance of Tooling System

Advanced Materials Research

Chun Gen Shen, Gui Cheng Wang, Shu Lin Wang, Gang Liu

EI检索

Vols. 317-319(2011)

2011

62

The Imbalance Source of Spindle-Tool System and Influence to Machine Vibration Characteristics

ICDMA 2011

Chungen Shen 

EI检索

2011:p1288-1291

2011

63

Experiment Investigation on Dynamic Performance of Tool System and Influential Factors

MACE 2011

Chungen Shen 

EI检索

2011:p1306-1309

2011

64

液黏传动变形界面间油膜温度场实验研究 

中南大学学报(自然科学版)

谢方伟,侯友夫,张立强,袁晓明,宋喜福,席涛

EI检索

2011.12,Vol.42No.12:p3722-3727

2011

65

基于响应曲面法的激光透射连接聚合物工艺参数优化

激光与光电子学进展

姜敏凤, 许贞凯, 刘会霞, 李品,宋新华,王凯

 

48, 071408: p071408- 1-10

2011

66

金属板材直线单曲面激光弯曲成形研究

激光与光电子学进展

姜敏凤, 陶茂科,刘会霞,李品,张成,王霄

 

2011,48, 081408,p 081408- 1-5

2011

67

振镜扫描激光透射连接PET薄膜与316L不锈钢薄板

应用激光

姜敏凤,宋新华,王凯,张成,张虎,刘会霞

 

2011,31(4) (p:285-290)

2011

68

Numerical simulation and experimentation of a novel micro scale laser high speed punching

International Journal of Machine Tools & Manufacture

Huixia Liu , Zongbao Shen, Xiao Wang, Hejun Wang, Maoke Tao

SCI检索

50 (2010) 491–494.(SCI收录,IF=1.919)

2010

69

Micromould based laser shock embossing of thin metal sheets for MEMS applications

 Applied Surface Science

 Huixia Liu, Zongbao Shen, Xiao Wang, Hejun Wang, Maoke Tao

SCI检索

2010,256:4687-4691.(SCI检索,IF=1.793)

2010

70

Laser transmission joint between PET and titanium for biomedical application

Journal of Materials Processing Technology

Xiao Wang,Pin Li,Zhenkai Xu,Xinhua Song,Huixia Liu

SCI检索

2010,210(13): 1767-1771 (SCI检索,IF=1.143)

2010

71

The nonparaxial propagation of the TEM0I* doughnut beam with the orbital angular momentum in the far field 

 OPTICS COMMUNICATIONS

Zhengling Wang, Ming Zhou, Wei Zhang, Chuanyu Gao, Guorong Cao 

SCI检索

283(20): 3874-3877 (SCI)

2010

72

双面激光喷丸强化ZK60镁合金的残余应力数值研究

中国激光

周建忠, 杨小东, 黄舒, 胡玲玲, 黄娟, 戴亚春

EI检索

37(7): 1850-1855

2010

73

微齿轮注塑成型正交优化及数值模拟

材料工程

戴亚春,王匀,周建忠,陈炜,董芳

EI检索

7:46-49

2010

74

激光弯曲陶瓷片的数值模拟

中国激光

胡玲玲, 周建忠, 杨小东, 黄舒

EI检索

 37(6): 1631-1635

2010

75

MEMS金属微构件的激光微喷丸强化技术分析与展望

激光技术

樊玉杰,周建忠,黄舒,卫登辉,王敏

 

34(5):665-669.

2010

76

铝-锂合金薄板半导体激光弯曲成形试验研究

中国激光

丁磊,刘会霞,王鹤军,王霄

EI检索

2010.8, Vol.37,No.8 p2143-2148

2010

77

医用PET薄膜与薄钛板激光透射连接工艺研究

中国激光

李品,刘会霞,许帧凯,宋新华,王霄

EI检索

2010.7, Vol.37,No.7 p1914-1919. 

2010

78

基于田口方法的Nd:YAG脉冲激光焊接工艺参数优化

中国激光

刘会霞,向宝珍,许贞凯,宋新华,王霄

EI检索

2010.11, Vol.37:p350-357

2010

79

医用聚对苯二甲酸乙二酯薄膜与薄钛板激光透射连接有限元模拟

中国激光

王霄,李品,刘会霞,宋新华, 许贞凯

EI检索

2010.5, Vol.37(5):p1391-1397

2010

80

多圆弧与三角形复合织构表面的动压润滑性能

江苏大学学报(自然科学版)

阮鸿雁,吕建军,司辉,刘会霞,王霄

EI检索

2010,31(3):254-258

2010

81

铝-锂合金薄板激光弯曲成形工艺参数的优化

应用激光

姜敏凤,丁磊,王霄,刘会霞

 

 2010.10, Vol.30(5):p399-403

2010

82

Research on modeling of shock wave pressure in micro-scale laser shot peening

 Journal of Harbin Institute of Technology 

Wang, Min ; Zhou, Jian-Zhong; Huang, Shu; Wei, Deng-Hui; Fan, Yu-Jie; Huang, Juan

EI检索

 17:119-122

2010

83

A statistical approach for determining process parameters effect on fatigue crack growth induced by laser shot peening 

 Journal of Harbin Institute of Technology 

Yang, Xiao-Dong; Zhou, Jian-Zhong; Zhao, Jian-Fei; Huang, Shu; Wang, Min; Fan, Yu-Jie; Ye, Hong-Wei

EI检索

17: 66-69.

2010

84

Numerical Simulation on 3D Residual Stress Field of Both-side Laser Shot Peened Specimen with Center-hole

Advanced Materials Research 

Yang, X.D. ; Zhou, J.Z.; Huang, S.; Hu, L.L.; Wang, C.D. 

EI检索

97-101:3816-3819

2010

85

Study on Strengthening Mechanism of Microscale Laser Shock Peening

Key Engineering Materials

Fan, Yujie; Zhou, Jianzhong; Huang, Shu; Wang, Min; Zhu, Yinbo; Hu, Lingling; Zhao, Jianfei 

EI检索

431-432 :221-224

2010

86

Finite element simulation of a novel laser high speed punching

International Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2010

Shen, Zongbao; Liu, Huixia; Wang, Hejun; Wang, Xiao

EI检索

v 2, p 289-291, 2010

#####

87

Study of Industrial Design Practical Education Based on Digital Design Experiments

International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

Wang, Chunyan; Zhang, Wenli; Yang, Jianfeng; Wang, Yayuan; Xu, Hongbing 

EI检索

v 1, p 450-453, 2010

#####

88

Determining Structural Modes of HSK Tool System Based on FEM and EMA

Advanced Materials Research

Shen, Chungen; Wang, Guicheng; Wang, Shulin; Liu, Gang 

EI检索

v139-141, p1479-1484,2010

2010

89

激光连续喷丸强化过程中应力的动态分析

中国激光

黄舒; 周建忠; 蒋素琴; 朱银波; 胡玲玲

CSCD,EI检索

Vol.37,No1,2010,1,p256-260

2010

90

Simulative and Experimental Study on Laser Compound Forming of Plate

Advanced Materials Research

Huang, S.; Zhou, J.Z.; Chen, Y.B.; Wang, C.D.; Yang, X.D.; Dai, Y.C.  

EI检索

v 97-101, p3857-3860,2010

2010

91

Experimental Study on Laser Shock Peening of AZ31B Magnesium Alloy Sheet

Materials Science Forum

Huang, S.; Zhou, J.Z.; Jiang, S.Q.; Yang, X.D.; Wang, C.D.; Dai, Y.C.

EI检索

v 628-629, p 691-696,2010

2010

92

复合固体润滑膜的切削性能研究

润滑与密封

易小勇,李长生,宋昌才,司艺

 

2010.6,Vol.35No.6:p33-36

2010

93

脉冲激光烧蚀凹腔的实验分析及数值模拟

中国激光

刘会霞,杨胜军,王霄,李黎辉

EI检索

2009, 36(1): 219-223

2009

94

热塑性聚氨酯弹性体薄膜激光透射焊接工艺 

中国激光

刘会霞,李品,邢安,袁晓明,向宝珍,王霄

EI检索

2009, 36(s1): 156-160

2009

95

激光驱动飞片加载金属箔板成形实验研究

中国激光

刘会霞,杨昆,王匀,王霄,周明

EI检索

 2009, 36(5): 1292-1295

2009

96

激光切割超音速喷嘴的流场特性

中国激光

阮鸿雁,吕建军,杨波,王霄,刘会霞

EI检索

2009, 36(5): 1233-1238

2009

97

金属箔板激光动态微拉深成形技术

光电子·激光

刘会霞,李保春,杨昆,陈成,沈宗宝,王霄,周明

EI检索

2009,20(3):363-365

2009

98

激光驱动飞片加载金属箔板成形机理研究

中国机械工程

刘会霞  杨昆  王霄  王匀  李保春  高传玉  周明 

 

2009,20(7):865-868

2009

99

基于改进BP神经网络的数控机床振动趋势预测

制造技术与机床

黄建军,刘会霞,杨润党,倪炎榕,王霄

 

2009,4:63-65

2009

100

激光驱动飞片加载金属箔板成形及数值模拟,

塑性工程学报

王霄,杨昆,刘会霞,王匀,李保春,沈宗保

 

2009,vol.16,NO.1:25-30

2009

101

两种不同热塑性塑料之间的激光透射焊接试验

焊接学报

王霄,杨昆,张惠中,刘会霞

EI检索

2009,vol.30,NO.5:97-100

2009

102

衍射型激光透射塑料焊接的衍射光学元件设计与分析

中国激光

王霄,李品,陈成,邢安,向宝珍,刘会霞 

EI检索

2009, vol.36(s1): 161-165

2009

103

激光驱动飞片加载金属箔板成形的加载机制

中国激光

王霄,杨昆,刘会霞,王匀,李保春,高传玉,周明

EI检索

2009, vol.36.NO.6:1569-1574

2009

104

从自然到仿生的超疏水表面的微观结构

纳米技术与精密工程

 叶霞, 周明, 李健, 刘会霞, 袁润, 杨海峰, 保家,蔡兰

EI检索

Vol.7,No.5,2009,9p381-386

2009

105

Numerical simulation and experimentation of a novel laser indirect shock forming

Journal of Applied Physics

Huixia Liu, Zongbao Shen, Xiao Wang, Hejun Wang

SCI检索

2009,106,063107 (SCI检索,IF=2.201)

2009

106

Finite Element Analysis of the Effects of Coated Tool on High Speed Orthogonal Machining

Key Engineering Materials

H.X. Liu, H. Yan, X. Wang, S.B .Lu, K. Yang and L. Cai

EI检索

Vols. 392-394 (2009) pp 879-883

2009

107

Finite Element Modeling and Analysis of Cutting-Direction Burr Formation

Key Engineering Materials

X. Wang, H. Yan, C. Liang, B. Wu, H.X. Liu and L. Cai

EI检索

Vols. 392-394 (2009) pp 88-92

2009

108

Numerical Simulation of Liquid-Solid Two-Phase Flows on Internal and Outside Flow Field in High Pressure Abrasive Water Jet Cutting Nozzle

Key Engineering Materials 

H.Y. Ruan, H.X .Liu, S.Y. Ding, K. Yang, X. Wang and L. Cai

EI检索

Vols. 392-394 (2009) pp 565-569

2009

109

An extracted method for slip length of super-hydrophobic surfaces: taking into account the influence of contact area reduction on results

Review of Scientific Instruments

Ming Zhou, Jian Li, Haifeng Yang, Baojia Li, Huixia Liu, Lan Cai, Xia Ye

SCI检索

 2009 (SCI检索)

2009

110

Investigation of ultrafast electron dynamics of nickel film and micro-nano-structure film  

Chinese Optics Letters

Weifeng Jin, Ming Zhou, Changlong Liu, Hui Wang, Huixia Liu, and Naifei Ren

SCI检索

2009,7(7):650.(SCI检索)

2009

111

激光在脆性材料加工中的应用

 中国激光

朱银波,周建忠,黄舒,樊玉杰,蒋素琴

EI检索

36s1:143-146

2009

112

激光清洗技术研究及应用

中国激光

王敏,周建忠,黄舒,胡玲玲

EI检索

36s1:174-177

2009

113

Prediction on Residual Stress and Fatigue Life of Magnesium Alloy Treated by Laser Shot Peening

Materials Science Forum

Jiang, S.Q.; Zhou, J.Z.; Fan, Y.J.; Huang, S.; Zhao, J.F

EI检索

626-627:393-398.

2009

114

The Optimization of Processing Parameters and Experimental Investigation on Ni-based Components Fabricated by Laser Cladding

Key Engineering Materials 

Ji, Xia ; Zhou, Jianzhong; Qiu, Feng; Jiang, Suqing

EI检索

407-408: 676-679

2009

115

Influence of Compressive Stress on Stress Intensity Factor of Hole Edge Crack by High Strain Rate Laser Shock Processing

Materials and Design

Ren, X.D.; Zhang, Y.K.; Zhou, J.Z.; Lu, J.Z.; Zhou, L.C. 

EI检索

30: 3512-3517

2009

116

Numerical Simulation On Fatigue Crack Growth Of Metal Sheet Induced By Laser Shot Peening

International Journal Of Modern Physics B

Zhou Jian-zhong, Zhao Jian-fei, Huang Shu

SCI检索

23,6 & 7 :1646-1651

2009

117

Investigation of the stress intensity factor changing on the hole crack subject to laser shock processing

Materials and Design

Zhang, Y.K.; Ren, X.D.; Zhou, J.Z.; Lu, J.Z.; Zhou, L.C

EI检索

30:2769-2773

2009

118

Modeling and Simulation of Implant-supported Fixed Partial Dentures Prosthodontic

Applied Mechanics and Materials 

Liu, Donglei; Yan, Hua; Shen, Zongbao; Song, Xinhua; Wang, Xiao

EI检索

Vols. 16-19(2009) pp 1112-1116

2009

119

New Methods for SOC Training

Proceedings of The 9th international Conference on Modern Industrial Training

Sun Zhiquan,Xu Baowen,Zhou Yan,Chen Lu,Liu Huixia,Xu Zhenying,Yuan Yinnan

 

2009,10,308-311

2E+05

120

激光驱动飞片加载金属箔板成形机理研究

中国机械工程

刘会霞,杨昆,王霄等.

 

2009,20(7):865-868

2011

121

HSK 主轴 —工具系统不平衡精度等级的计算和控制

工具技术

沈春根,王贵成,王树林

 

2009,Vol.43No.12:p50-52

2009

122

静电喷雾灭蝗机具的机械设计

江苏大学学报(自然科学版)

葛福才、许友谊、沈良钧、许乔宝、葛涛

EI检索

vol.30,NO.3,2009(p236-240)

2009

123

Machine Vision On-Line Detection Quality  of Soft Capsules Base on SVM

Computer and Computing Technologies in  AgricultureII

葛福才、石吉勇、许友谊、邹小波、赵杰文

 

Volume 2

2009

124

On-Line Sorting Maturity of Cherry Tomato by Machine Vision

Computer and Computing Technologies in  AgricultureII

张应龙、殷晓平、邹小波、赵杰文

 

vol.2009921742(P2223-2225)Volume 3

2009

125

ON-LINE DETECTION OF DEFECTS ON FRUIT BY MACHINE VISION SYSTEMS BASED ON THREE-COLOR-CAMERAS SYSTEMS

Computer and Computing Technologies in  AgricultureII 

许乔宝、邹小波、赵杰文

 

vol.2009921742(P2231-2235)Volume 3

2009

126

Numerical Simulation on Laser Peen Forming of sheet Metal

Materials Science Forum

Zhou, Jianzhong ; Fan, Yujie; Huang, Shu; Jiang, Suqin; Du, Jianjun

EI 检索

575-578: 572-578

2008

127

Mechanism and Experiment of Surface Modification by Means of Laser Cladding Combined with Laser Shot Peening

PICALO 2008 Conference Proceedings

Jiang, Suqin ; Zhou, Jianzhong; Huang, Shu; Xia, Ji 

EI 检索

100-105,4.16-18

2008

128

Theoretical Study on the Bending Deformation of Metal Plate Induced by Repetitive Laser Shot Peening

Key Engineering Materials

Zhou, Jianzhong ; Huang, Shu; Ji, Xia; Du, Jianjun; Yang, Chaojun; Zhang, Yongkang

EI 检索

375-376:57-61

2008

129

Dynamical Simulation and Experimental Study on Laser Peen Forming of 6061-T6 aluminum alloy Plate

PICALO 2008 Conference Proceedings

Zhou, Jianzhong ; Huang, Shu; Fan, Yujie; Jiang, Suqin; Xiao, Li; Sun, Yueqing; Chen, Yibin 

EI 检索

4.16-18:646-651

2008

130

Study on the process of laser compound forming of sheet metal

PICALO 2008 Conference Proceedings

Chen, Yibin; Zhou, Jianzhong; Huang, Shu; Xiao, Li; Sun, Yueqing

EI 检索

442-447,4.16-18

2008

131

FE simulation of complex contour forming of sheet metals based on laser bending

Materials Science Forum 

Chen, Yibin; Zhou, Jianzhong; Huang, Shu; Sun, Yueqing  

EI 检索

575-578:696-701

2008

132

Experimental Investigation on the Nickel-based metal components fabricated by laser cladding.

Key Engineering Materials

Ji, Xia; Zhou, Jianzhong; Guo, Huafeng; Xu, Dapeng  

EI 检索

375-376:338-342

2008

133

Numerical Analysis on the Process of Laser Continuous Peen Forming of Metal Plate

Key Engineering Materials

Jiang, Suqin; Zhou, Jianzhong; Huang, Shu; Du, Jianjun; Sun, Yueqing; Yang, Jichang 

EI 检索

 375-376:603-607

2008

134

Optimization of laser peening parameters using Taguchi method

Applied Mechanics and Materials

Sun, Y.Q. ; Zhou, J.Z.; Chen, Y.B.; Huang, S. 

EI 检索

10-12:692-296

2008

135

3D finite element simulation for the temperature field of direct metal laser sintering process

Journal of Computational and Theoretical Nanoscience

Xia, Ji ; Jian, Zhong Zhou; Hua, Feng Guo; Su, Qing Jiang  

SCI检索

5:1578-1582

2008

136

Numerical Simulation of Laser Surface micro-Texturing

Materials Science Forum 

Hui-Xia  LIU, YiXing CHEN, Xiao WANG, Xiaoxia MENG ,Yonghong FU, Lan  CAI

EI检索

2008,Vols. 575-578,pp 678-683

2008

137

DEVELOPMENT OF A KNOWLEDGE-BASED INTELLIGENT CAD SYSTEM FOR AUTOMOTIVE PANEL DIE

Journal of Advanced Manufacturing Systems (JAMS)

LIU HUI-XIA ,WEI WEI, WANG XIAO, CAI LAN

EI检索

2008,7(1):51-54

2008

138

Numerical Simulation and Experiment Study on Pulsed laser  Surface Micro-texturing in Carbon Tool Steel 

Proceedings of the 3rd Pacific International Conference on Application of Lasers and Optics

Huixia Liu , Shengjun Yang , Xiao Wang. 

EI检索

2008 , p 992-997

2008

139

Research on Laser Transmission Welding PVC 

Proceedings of the 3rd Pacific International Conference on Application of Lasers and Optics

Huixia Liu,An Xing,Cheng Chen, Huizhong Zhang,Xiao Wang

EI检索

p 982-986, 2008

2008

140

Full numerical simulation to the performance of micro-textured mechanical face seals. 

Journal of Advanced Manufacturing Systems (JAMS)

Wang, Xiao;Liu, Huixia;Chen,Wei; Liu, Changjing;Fu,Yonghong,Cai,Lan 

EI检索

2008.02.vol7.p267-270

2008

141

Research on Cold Taper-Rolling Law of the Spiral Blade Based on Finite Element Method

Materials Science Forum

Xiao WANG,Xiao bo FAN,Huixia LIU 

EI检索

Vols. 575-578 (2008) pp 305-310

2008

142

高速诱导轮三维非定常湍流数值模拟

排灌机械

许友谊、奚伟永、杨敏官

 

vol,26,No.3 may 2008(p59-63)

2008

143

拼焊板弯曲成形中的回弹精确预测及关键问题分析

煤矿机械

马伟民

 

VOL.29,NO.5,2008(P91-93)

2008

144

基于弧形顶板模具结构的激光拼焊板回弹控制研究

拖拉机与农用运输车

马伟民、应才苏、朱元右、袁国定

 

VOL.35,NO.6,dec.,2008(p75-77)

2008

145

基于电子视觉的小型水果智能分级设备的开发研究

粮油加工

张应龙、许友谊、葛福才、

 

NO.9,2008(P123-124)

2008

146

HSK工具系统结构模态的有限元分析

工具技术

沈春根; 王贵成; 王树林;

 

2008,6 ,P54-56

2008

147

HSK工具系统临界转速的有限元计算和分析

机械设计与研究

沈春根; 王贵成; 王树林;

 

Vol.24,No5,2008,10,p116-124

2008

148

多种规则微造型表面摩擦特性的试验研究

润滑与密封

刘东雷; 孟小霞; 袁春俭; 符永宏; 王霄; 王亚元

 

Vol.33,No7,2008,7,p28-31

2008

149

V、Nb与变形条件对含钒微合金钢形变强化相变的影响

农业机械学报

李新城,张炎,姜银方,蒯苏苏,蔡守桂

EI检索

2008,5,p186-191

2008

150

Effect of V,Nb and Deformation Condition on Deformation Enhanced Ferrite Transformation in V-microalloying Steel

Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery

Li, Xincheng ; Zhang, Yan; Jiang, Yinfang; Kuai, Susu; Cai, Shougui

EI检索

v39,n5,p186-191,2008,5 

2008

151

Theoretical and Experimental Study on Laser Compound Forming of Plate

Key Engineering Materials

Huang, Shu; Zhou, Jianzhong; Chen, Yibin; Sun, Yueqing; Du, Jianjun

EI检索

v375-376, p343-347,2008

2008

152

Visual Study on Surface Micro-topography and Residual Stress of Sheet Metal after Pulsed Laser Peening

Key Engineering Materials

Huang, S.; Zhou, J.Z.; Du, J.J.; Sun, Y.Q.; Ni, M.X.

EI检索

v373-374, p334-337,2008

2008

153

Numerical Simulation and Response Optimizer Design of Strengthening Effects Induced by Laser Shock Peenin

Materials Science Forum

Huang, Shu; Zhou, Jian-Zhong; Sun, Yue-Qing; Chen, Yi-Bin; Jiang, Su-Qin

EI检索

575-578:p373-378

2008

154

规则微造型表面磨损过程的有限元分析

润滑与密封

刘会霞,袁春俭,司辉,王霄,符永宏

 

2008,Vol.33,No.2,(p1-4)

2008

155

HDPE激光透射焊接工艺的研究

材料工程

刘会霞,张惠中,丁国民,王霄

EI检索

2008(11)(p13-18)

2008

156

聚氯乙烯激光透射焊接温度场的有限元模拟

中国激光

刘会霞,邢安,张惠中,李品,向宝珍,王霄

EI检索

Vol.35,No.11,2008,11,(p1801-1807)

2008

157

聚丙烯塑料激光透射焊接工艺

中国激光

王霄,张惠中,丁国民,季进清,刘会霞

EI检索

vol.35,No.32008,3,P466-471

2008

158

基于全息技术的激光透射塑料焊接研究

激光技术

王霄, 季进清,张惠中, 刘会霞

 

vol.32,2008.NO.5.P510-512

2008

159

车削真实粗糙表面的弹塑性接触有限元分析

润滑与密封

王霄,梁春,刘会霞,闫华

 

2008, vol.33(12):p72-74,110

2008

160

激光喷丸强化铝合金疲劳特性的数字化分析

中国激光

周建忠,黄舒,赵建飞,蒋素琴,朱银波,杨建风

EI检索

35(11):1735-1740

2008

161

弹性预加载下板料激光喷丸成形特性

中国激光

张兴权,张永康,周建忠,顾永玉,王正

EI检索

35(7):1095-1099

2008

162

微注射浇注系统对微制件熔接缝形成的影响的模拟研究

材料工程

戴亚春,王匀,周建忠

EI检索

3:28-31

2008

163

激光熔覆成形Ni 基合金层的研究

金属铸锻焊技术

郭华锋,李志,周建忠,徐大鹏

 

37(11):77-80

2008

164

激光冲击对金属板料裂纹的影响模型

中国机械工程

任旭东,张永康,周建忠,顾永玉,周立春

EI检索

19(3):35-360

2008

165

基于Taguchi方法的激光喷丸强化工艺参量的优化研究

激光技术

孙月庆,周建忠,梁庆磊,陈毅彬,黄舒

 

4:377-380

2008

166

金属板料激光预应力复合的喷丸成形

中国激光

周建忠, 黄舒, 杜建钧, 陈毅彬, 孙月庆

EI检索

34(6): 861-865

2007

167

金属板料激光喷丸成形理论研究与数值模拟

中国激光

周建忠, 倪敏雄, 张永康, 杨超君, 杜建钧, 曹向广

EI检索

34(2):288-291

2007

168

激光喷丸后板料表面微观形貌的可视化数值研究

中国激光

周建忠, 杜建钧, 黄舒, 杨超君, 倪敏雄, 曹向广

EI检索

34(5):728-732

2007

169

激光直接烧结成形金属零件的实验研究

中国激光

周建忠,郭华锋,徐大鹏,季霞

EI检索

34S.:151-155

2007

170

激光直接烧结成形多层金属薄壁件的温度场有限元模拟

中国机械工程

周建忠, 郭华锋, 徐大鹏, 季霞

EI检索

18(21):2618-2623

2007

171

金属板料的激光喷丸变形理论

材料研究学报

周建忠, 杜建钧, 黄舒, 杨超君

EI检索

21(6):622-626

2007

172

基于激光喷丸的板料成形试验研究

塑性工程学报

张兴权, 张永康, 周建忠, 顾永玉

EI检索

14(5):62-66

2007

173

激光窄条喷丸成形的实验研究

中国激光

张兴权, 张永康, 周建忠, 顾永玉, 杨超君

EI检索

34(10):1446-1450

2007

174

金属板料激光冷塑性弯曲的研究

航空学报

张兴权, 张永康, 周建忠, 顾永玉, 杜建钧

EI检索

28(1):249-252

2007

175

激光冲击工艺对钛合金疲劳寿命的影响

中国有色金属学报

任旭东, 张永康, 周建忠, 顾永玉, 张新权

EI检索

17(9):1486-1489

2007

176

激光熔覆裂纹产生机理及控制方法分析

工具技术

徐大鹏, 周建忠, 郭华锋, 季霞

 

41(4):24-28

2007

177

激光冲击钛合金表面退火后的残余应力分布

农业机械学报

任旭东, 张永康, 周建忠, 殷苏民, 孔德军

EI检索

38(5):165-167

2007

178

航空钛合金的激光冲击研究

华中科技大学学报

任旭东, 张永康, 周建忠, 马壮

EI检索

35:150-152

2007

179

发动机曲轴的激光冲击复合处理工艺研究

内燃机工程

任旭东, 张永康, 周建忠, 张新权

EI检索

28(2):56-59

2007

180

QT700球墨铸铁曲轴的激光冲击强化试验

江苏大学学报

任旭东, 张永康, 周建忠, 孔德军, 张新权

EI检索

28(4):289-292

2007

181

激光熔覆成形薄壁金属制件精度的预测模型

中国激光

徐大鹏,周建忠,郭华锋,季霞

EI检索

34S:102-105

2007

182

球铁曲轴零件的激光冲击强化

中国激光

杨建风,周建忠,冯爱新

EI检索

2007.增刊,Vol.34:p78-81

2007

183

受控激光喷丸强化技术

中国激光

孙月庆,周建忠,陈毅彬,黄舒

EI检索

34S:74-77

2007

184

Non-traditional forming process of sheet metal based on laser shock waves

Key Engineering Material

J.Z. Zhou, H.X. Liu, C.J. Yang, X.G. Cao

EI 检索

 2007,Vol.329:637-642

2007

185

High Dense Compressive Residual Stress Produced in Laser Shock Processing on Ti6Al4V Alloys

Key Engineering Materials 

Ren, X.D. ; Zhang, Y.K.; Zhou, J.Z.; Gu, Y.Y.; Xu, Y.Y.; Zhang, X.Q. 

EI 检索

353-358:1617-1620

2007

186

Coating Effect on Increasing Mechanical Property of 6061-T651 Alloy by Laser Shock Processing

Materials Science Forum 

X.D. Ren, Y.K. Zhang, J.Z. Zhou, A.X. Fen and J.Z. Lu 

EI 检索

546-549: 681-686

2007

187

Effect of Shot Strip Interval and Shot Times on Laser shot Peen-forming with Repetition Laser Pulse

Key Engineering Materials

Yang, Chaojun; Zhang, Yongkang; Zhou, Jianzhong; Ni, Mingyong; Du, Jianjun; Zhang, Xingquan; Zhou, Jun; Cao, Xiangguang 

EI 检索

353-358:199-202

2007

188

金属板料激光喷丸与机械喷丸强化的应力场模拟

中国激光

杜建钧,周建忠,杨超君,倪敏雄,曹向广,黄舒

EI检索

34S:98-101

2007

189

Delta 型并联运动激光切割机床的工作空间分析  

农业机械学报

王霄,韩亚峰,刘会霞

EI检索

2007.vol.38.NO.1 p154-157

2007

190

基于ABAQUS的金属板料激光冲击成形数值模拟

农业机械学报

周建忠,杜建钧,杨超君,刘会霞等

EI检索

2007,Vol.38(1):132-138

2007

191

Coating Influence Residual Stress in laser Shock Processing

progresses in fracture and strength of materials and structures

Xu, Y.Y. ; Ren, X.D.; Zhang, Y.K.; Zhou, J.Z.; Zhang, X.Q. 

EI检索

Volumes353-358 of key engineering materidls 4-vol.-set(P1753-1756)

2007

192

金属板料受控激光喷丸强化中的残余应力场分析

农业机械学报

黄舒,周建忠,陈毅彬,孙月庆

EI检索

2007.12, Vol.38No.12:p195-199

2007

193

连续螺旋叶片异面成形规律研究与有限元模拟.

煤矿机械

刘会霞,范晓波,王霄

 

2007.1 vol.28.NO.1.(p 565-567+580)

2007

194

飞锤支架中心孔的加工工艺设计

制造技术与机床

顾佩兰、宋昌才

 

 No.8,2007. (p26-28)

2007

195

基于电子视觉系统的软胶囊自动分选机的开发研究

食品科技

张应龙、葛福才、许友谊

 

vol.193,NO.11,2007(p135-138)

2007

196

激光板料成形技术的研究与应用

机械设计与制造

陈毅彬, 周建忠, 孙月庆, 黄舒

 

9:132-134 

2007

197

激光冲击强化效果的无损检测

机床与液压

杨建风, 周建忠, 冯爱新

 

35(5):160-162

2007

198

基于进化神经网络的激光熔覆层质量预测

激光技术

徐大鹏, 周建忠, 郭华锋, 季霞

 

31(5):511-514

2007

199

应用ABAQUS模拟激光焊接温度场

激光技术

胡增荣, 周建忠, 郭华锋, 杜建钧

 

31(3):326-329

2007

200

激光熔覆成形有限元模拟的研究进展

热加工工艺

郭华锋, 李志, 周建忠, 季霞, 李粤

 

36(19):80-83

2007

201

铝合金板激光冲击变形实验及有限元模拟

激光技术

王广龙,周建忠

 

31(5):555-557

2007

202

同轴送粉激光熔覆件质量影响因素的研究

工具技术

季霞, 周建忠, 郭华锋, 徐大鹏

 

41(8):27-31

2007

203

基于Abaqus的激光板料成形的数值模拟

应用激光

陈毅彬,周建忠,黄舒,孙月庆,蒋素琴

 

27(3):175-180

2007

204

基于N-S方程的微造型表面动压润滑性能的分析研究

润滑与密封

王霄, 孟小霞,刘东雷,刘会霞 

 

2007,Vol.32(3):38-42

2007

205

不同微细造型几何形貌对润滑性能影响的数值模拟

润滑与密封

王霄,张广海,陈卫,刘会霞, 符永宏,蔡兰

 

2007,Vol.32(8):66-73

2007

206

激光微造型中烧蚀热场及弹坑的数值模拟 

激光技术

王霄, 陈怡星, 刘会霞,刘长京,丁国民

 

2007, Vol.31(6):565-580

2007

207

A Comparison Study on the Effectiveness of Stepped Binder and Weld Line Clamping Pins on Formability Improvement for Tailor Welded Blanks

Journal of Materials Processing Technology

陈炜

SCI

207 (2008)

2008

208

Study on Multi-stage Sheet Metal Forming for Automobile Structure-pieces

Journal of Materials Processing Technology

陈炜

SCI

187-188 (2007)

2007

209

纳米晶体Ti表面磁控溅射SiC薄膜的干摩擦学性能

稀有金属材料与工程

许晓静

SCI

2011, 40 (6): 991-994

2011

210

SiC薄膜对纳米结构Ti拉伸和摩擦学性能的影响

稀有金属材料与工程

许晓静

SCI

2007, 36 (s1): 911-914

2007

211

锶微合金化的高锌2099型铝合金抗晶间腐蚀及剥蚀性能研究

稀有金属材料与工程

许晓静

SCI

2011, 40 (s2): 248-251

2011

212

Microstructured-core photonic-crystal fiber for ultra-sensitive refractive index sensing

Optics Express

孙兵,陈明阳等

SCI

201106

2011

213

Design and analysis of multi-ring microstructured-core optical fibers

Optics Communications

陈明阳

SCI

2011,19(5)

2011

214

Design of dual-mode optical fibres for the FTTH applications

Journal of Optics

陈明阳

SCI

2011,284(24)

2011

215

Design and analysis of a low-loss terahertz directional coupler based on three-core photonic crystal fibre configuration

Journal of Physics D: Applied Physics

陈明阳

SCI

2011,13(1)

2011

216

Bend Insensitive Design of Large-Mode-Area Microstructured Optical Fibers

Journal of Lightwave Technology

陈明阳

SCI

2011, 44(40)

2011

217

用于太赫兹波传输的低损耗、高双折射光纤研究

物理学报

付晓霞,陈明阳

SCI

2011, 29(15)

2011

218

Proposal and design of sectorial cladding optical fibre for large-mode-area, single-mode operation

Journal of Optics

陈明阳

SCI

2010, 12(5)

2010

219

Design of all-solid large-mode area microstructured-core optical fibers

Optics Communications

陈明阳

SCI

2010, 283(16)

2010

220

Design of broadband polarization splitter based on partial coupling in square-lattice photonic-crystal fiber

Applied Optics

陈明阳

SCI

2010, 49(16)

2010

221

Broadband Single-Polarization Operation in Square-Lattice Photonic Crystal Fibers

Journal of Lightwave Technology

陈明阳

SCI

2010, 28(10)

2010

222

Design and Analysis of Single-Mode Polymer Segment Cladding Optical Fibers

Journal of Lightwave Technology

陈明阳

SCI

2010, 28(22)

2010

223

Coupling characteristics of three-core photonic crystal fiber couplers

Journal of Optics A: Pure and Applied Optics

陈明阳

SCI

2009, 11(1)

2009

224

Wavelength-selective coupling of dual-core photonic crystal fiber and its application

Chinese Optics Letters

陈明阳

SCI

2009, 7(5)

2009

225

A novel WDM component based on a three-core photonic crystal fiber

Journal of Lightwave Technology

陈明阳

SCI

2009, 7(13)

2009

226

Mode converter based on mode coupling in an asymmetric dual-core photonic crystal fibre

Journal of Optics A: Pure and Applied Optics

陈明阳

SCI

2008, 10(11)

2008

227

Improved design of polarization-maintaining photonic crystal fibers

Optics Letters

陈明阳

SCI

2008, 33(21)

2008

228

Polarization-maintaining large-mode-area microstructured-core optical fibers

Journal of Lightwave Technology

陈明阳

SCI

2008, 26(13)

2008

229

Polarization and leakage properties of rectangular lattice photonic crystal fibres with doped cores

Journal of Optics A: Pure and Applied Optics

陈明阳

SCI

2007, 9(7)

2007

230

Polarization-maintaining large-mode-area photonic crystal fibres with solid microstructured cores

Journal of Optics A: Pure and Applied Optics

陈明阳

SCI

2007, 9(10)

2007

231

Polarization and leakage properties of large-mode-area microstructured-core optical fibers

Optics Express

陈明阳

SCI

2007, 15(19)

2007

232

Application of orthogonal sampling to incomplete data interferometric tomography: Numerical simulation and experimental analysis

Applied Optics

姚红兵

SCI

2008

2008

233

Measurement on infrared radiation burning temperature field with Moire deviation tomography

Microwave and Optical Technology Letters

姚红兵

SCI

2007

2007

234

高胆固醇血样的红外吸收光谱研究

光谱学与光谱分析

姚红兵

SCI

2007, 27(6)

2007

235

Microstructured-core photonic-crystal fiber for ultra-sensitive refractive index sensing

Optics Express

孙兵、陈明阳

SCI

2011,19(5)

2011

236

激光拼焊板成形极限图的理论建立方法

机械工程学报

陈炜

EI

2009

2009

237

双相钢拼焊板温拉伸流变应力研究

机械工程学报

陈炜

EI

2011

2011

238

Experiment and analysis of squirrel cage asynchronous magnetic coupling

Key Engineering Materials

杨超君

EI

2011, 464: 28-32

2011

239

Performance analysis of auto-control adjustable speed asynchronous disk magnetic coupling

Advanced Materials Research

杨超君

EI

2011, 199-200: 313-317 

2011

240

鼠笼转子磁力联轴器空载气隙磁场有限元分析

江苏大学学报(自然科学版)

杨超君

EI

2010, 31(1)

2010

241

鼠笼转子异步磁力联轴器磁场的有限元瞬态分析

江苏大学学报(自然科学版)

杨超君

EI

2010, 31(4)

2010

242

Numerical Analysis of Electromagnetic Field of Solid Rotor Asynchronous Permanent Magnetic Coupling by Finite Element Method

Materials Science Forum

杨超君

EI

2008

2008

243

Effect of shot strip interval and shot times on laser shot peen-forming with repetition laser pulse

Key Engineering Materials

杨超君

EI

2007

2007

244

激光冲击强化的冲击波幅值和飞行时间的测量

激光技术

王飞、姚红兵

CSCD

2010, 34(5)

2010

245

遮光法测量铝薄板高压加载下的动态特征量

激光技术

袁蓓、姚红兵

CSCD

2011, 35(1)

2011

246

Emission spectra of aluminum plasma induced by high energy and multi-pulse laser

强激光与粒子束

姚红兵

CSCD

2011, 23(8)

2011

247

AZ31B镁合金中强激光诱发冲击波的实验研究

中国激光

于水生、姚红兵

CSCD

2010, 37(5)

2010

248

光通过纳米颗粒随机散射体透射光强的计算及分析

光学学报

叶云霞

CSCD

2007, 27(5): 951-956

2007

249

全柔性并联机器人支链静刚度矩阵的建立

中国机械工程 

杨启志

EI

200810

2008

250

三平移全柔性并联微动机器人机构静力学分析

农业机械学报 

杨启志

EI

200711

2007

251

基于影响系数的新型全柔性微动并联机器人运动特性分析

中国机械工程 

杨启志

EI

200702

2007

252

Kinematic Analysis and Simulation on Parallel Vibration Reduction Seat

Key engineering materials:functional manufacturing technologies and ceeusro II

杨启志

EI

201009

2010

253

Design of the fully compliant three-translational parallel micro-displacement vibration actuator

2010 International Conference on Mechanic Automation and Control Engineering (MACE2010)

杨启志

EI

201006

2010

254

基于并联机构的车辆多维减振座椅的设计

机械设计

杨启志

SCD

201109

2011

255

三自由度全柔性并联微动激振台的设计研究

机械设计与研究

杨启志

SCD

201103

2011

256

Analysis of traditional revolute pair and the design of a new compliant joint

2011 International Workshop of Automobile, Power and Energy Engineering(APEE 2011)

杨启志

EI

201106

2011

257

Design of the Damping Seat Based on Parallel Mechanisms

2011 International Workshop of Automobile, Power and Energy Engineering(APEE 2011)

杨启志

EI

201106

2011


扫一扫
关注公众号
版权所有:工程训练国家级实验教学示范中心(江苏大学) CopyRights © 2012-2020 All Rights Reserved
地址:江苏省镇江市学府路301号 邮编:212013
联系电话:0511-88797498 电子邮箱:gyzx@ujs.edu.cn